沃爾沃卡特噴油器分解工具

下面的內容是對于沃爾沃卡特噴油器分解工具的事項闡述，所展示的噴油泵試驗臺都是現場拍攝，提供的內容都是經過液壓泵試驗臺廠家經驗所得，請點擊進入查看更多高壓共軌試驗臺的相關行業信息吧。

沃爾沃發動機卡特噴油器在需要維修測試工作中，務必使用專用的分解拆卸工具，其14mm 19mm套筒及外方拆拉工具需在額定的扭矩作用下分解；

使用該工具注意事項如下：

沃爾沃卡特噴油器分解工具說，在噴油嘴和油軌的接口處滴幾滴潤滑油，輕輕活動幾下就可以拔噴油嘴拔下來，拔噴油嘴時在下面接個容器，會有茶半杯汽油流出來，把清洗器的插頭和噴油嘴接好，紅色的線頭接正極，把清洗器的供電卡鉗和電瓶接好，紅色接正極，黑色接負極，把準備好的化油器清新劑從噴油嘴低端噴入即可。

• 

• 

• When the fuel injector of Volvo engine Carter needs to be repaired and tested, special disassembly and disassembly tools must be used. Its 14mm 19mm sleeve and external disassembly and pulling tools must be disassembled under the action of rated torque;

• Precautions for using this tool are as follows:

• Volvo Carter injector disassembly tool said that drop a few drops of lubricating oil at the interface between the injector and the fuel rail, gently move it for a few times, and then you can pull out the injector. When you pull out the injector, connect a container below, and half a cup of gasoline will flow out. Connect the plug of the washer with the injector, the red wire head with the positive pole, the power supply caliper of the washer with the battery, the red with the positive pole, and the black with the negative pole, Inject the prepared carburetor freshener from the low end of the fuel injector.

• 英文由百度翻譯，僅供參考。