柱塞柴油油泵壓密封試驗臺

柱塞柴油油泵壓密封試驗臺：本試驗臺采用專用機構實現徑部動態等壓測試法，對被測試偶件柱塞的等壓加壓和密封值進行測試，夾緊與托起由液壓控制；試油壓力和密封時間用多功能數字顯示儀顯示。

柱塞柴油油泵壓密封試驗臺功能特點：

本試驗臺采用專用機構實現徑部動態等壓測試法，對被測試偶件柱塞的等壓加壓和密封值進行測試，夾緊與托起由液壓控制；試油壓力和密封時間用多功能數字顯示儀顯示。

技術參數：被測偶件柱塞直徑≤φ26mm

被測偶件測試全行程10mm

傳動油泵油量10L/min

傳動油泵額定壓力6.3Mpa

傳動油泵電機 1.1KW 4極

夾緊油缸活塞行程60mm

計時范圍 0-99.9S

試油壓力顯示范圍0-40Mpa

重復測試誤差≤5%

外形尺寸mm 1000×600×150

長×寬×高

液壓油泵試驗臺重量 Kg 650

二、ZJJ型柱塞偶件降壓法徑部密封性試驗臺，是用于檢測噴油泵柱塞偶件徑部密封性的專用設備，能完成中小系列柱塞偶件徑部密封性的檢驗。其特點：采用壓力、計時數顯儀，檢測標準化，狀態自動化，測試夾具動作靈活可靠；誤差測量示值準確；操作簡單維修方便。技術參數：1.可試偶件：Ⅰ、Ⅱ、Ⅲ、A、B、Z噴油泵 2.壓力儀表：0～40兆帕 3.氣源壓力：0.5～0.8兆帕 4.夾緊氣壓：0.4～0.6兆帕 5.供油氣壓：0.25～0.35兆帕 6.過濾精度：0.5～0.8微米 7.壓力范圍：0.05～0.8兆帕 8.外形尺寸：1000×600×1250毫米 9.重量：500千克。

• 

• Functional features of plunger diesel oil pump pressure seal test bench:

• This test-bed adopts a special mechanism to realize the diameter dynamic isobaric test method, which tests the isobaric pressure and sealing value of the plunger of the tested coupling. The clamping and lifting are controlled by hydraulic pressure; The oil test pressure and sealing time are displayed with a multi-function digital display.

• Technical parameters: plunger diameter of the tested coupling ≤ φ 26mm

• The full test stroke of the tested couple is 10mm

• Oil volume of transmission oil pump 10l/min

• Rated pressure of transmission oil pump 6.3MPa

• Drive oil pump motor 1.1KW 4-pole

• Clamping cylinder piston stroke 60mm

• Timing range 0-99.9s

• The display range of oil test pressure is 0-40MPa

• Repeated test error ≤ 5%

• Overall dimension mm 1000 × six hundred × one hundred and fifty

• long × wide × high

• Weight of hydraulic oil pump test bench kg 650

• 2、 ZJJ type plunger coupling pressure reducing radial sealing test bench is a special equipment used to detect the radial sealing of plunger coupling of fuel injection pump, which can complete the inspection of radial sealing of small and medium series plunger coupling. Its features: using pressure, timing digital display, detection standardization, state automation, test fixture action is flexible and reliable; The error measurement indication is accurate; Simple operation and convenient maintenance. Technical parameters: 1. Test coupons: I, II, III, a, B, Z fuel injection pump 2. Pressure instrument: 0 ~ 40 MPa 3. Air source pressure: 0.5 ~ 0.8 MPa 4. Clamping air pressure: 0.4 ~ 0.6 MPa 5. Oil supply air pressure: 0.25 ~ 0.35 MPa 6. Filtration accuracy: 0.5 ~ 0.8 μ M 7. Pressure range: 0.05 ~ 0.8 MPa 8. Overall dimension: 1000 × six hundred × 1250 mm 9. weight: 500 kg.

• 英文由百度翻譯，僅供參考。